Course Outline

  • April 7, 2021 I Php 6,999.00 I Juan Bautista L. Lee II

     

    Course Outline:

    • Modern Maintenance Technologies
    • Functions of Lubricant
    • Anatomy of a Grease Lubricant
    • Main Contributors of Lubricant Degradation
    • Dangers of Mixing Lubricants
    • Types of Wear
    • Lubricant Cleanliness
    • Damage Caused by Particle, Water, and Air Contamination
    • Sources of Water Ingression
    • Proactive Steps to Address Particle, Water, and Air
    • Contamination Problems
    • Engine Oil Filtration
    • Varnish Formation Mechanism
    • Best Lubrication Storage and Handling Practices
    • Proper Oil Sampling Techniques
    • Developing a Comprehensive Lubrication Program
  • April 8, 2021 I Php 6,999.00 I Juan Bautista L. Lee II

     

    Course Outline:

    • Synthetic versus Mineral – based Lubricant
    • Lubrication Regimes
    • Classification and Properties of Additives
    • VI Improver Polymers
    • Oil Analysis Fundamentals
    • Best Sampling Practices
    • Finding The Best Sampling Locations
    • Control Failure Detectability
    • Influence of FMEA and Machine Criticality
    • Computing for Overall Lubricant Criticality
  • April 14, 2021 I Php 6,999.00 I Juan Bautista L. Lee II

     

    Course Outline:

    • Oil Aging Process
    • Common Laboratory Kinematic Viscometers
    • ISO versus SAE Viscosity Grades and Conversion
    • Viscosity Index
    • Analyzing and Interpreting Viscosity Changes
    • Acid and Base Numbers
    • Monitoring Acid Number Trends
    • Base Number Trends for Crankcase Oils
    • Fourier Transform Infrared Spectroscopy
    • Typical Absorption Wavenumbers for FTIR
    • Rotating Pressure Vessel Oxidation Test (RPVOT)
    • Varnish Formation Mechanism
    • Membrane Patch Colorimetry
    • Grease Analysis
    • Additive Depletion Mechanism
    • Incompatibility of Lubricant Mixing
  • April 15, 2021 I Php 6,999.00 I Juan Bautista L. Lee II

     

    Course Outline:

    • Particle Destructive Potential
    • Understanding Particle Count
    • Setting Cleanliness Targets
    • Machine Criticality Factor Determination
    • Corrective Actions to Address Particle Contamination
    • Types of Particle Counters
    • Analyzing and Interpreting Particle Count
    • Field or Lab Test for Grease Contamination
  • April 16, 2021 I Php 6,999.00 I Juan Bautista L. Lee II

     

    Course Outline:

    • Target Setting for Moisture Level
    • FTIR versus KF for Water Detection
    • Water Removal Methods
    • Dangers of Air Entrainment
    • Glycol/Antifreeze Contamination
    • Soot Contamination in Engine Fuel Dilution
  • April 21, 2021 I Php 6,999.00 I Juan Bautista L. Lee II

     

    Course Outline:

    • Wear Debris Concentration Corrosive Wear Particles
    • The Secret to Fault Detection and Analysis
    • Spectrometric Elemental Analysis
    • Monitoring Dust and Dirt Contamination
    • Machine Metallurgy
    • Three Ferrous Density Testers Ferrographic Analysis
  • March 24, 2021 I Php 6,999.00 I Juan Bautista L. Lee II

     

    Course Outline:

    • Statistical Predictive Maintenance Limits
    • Test Slates by Machine Application
    • New Oil and Reference Limits
    • Combining Inspections with Simple Field Test Kits
    • Case Studies Workshop